Monocon Monolithic Construction System 

​

monocon From a technical point of view, the Monolithic Reinforced Concrete Construction System as a patented construction system, as evidenced by its achievements on all continents, represents today's cutting-edge development, from the global terminology of the economic advantages of the time to intensive construction practices around the world.

The basic idea can be given with great advantageous terms based on the possibility of using a traditional wall construction system and a heat and sound insulation solution using reinforced concrete (RC).

This goal has been achieved by connecting light sheet panels made of one or two sheets of advanced Polystyrene with appropriate densities and 3,5-5 galvanized and electro-welded steels.

With the easy process during the establishment, the panels in question are finished with the addition of concrete after they are roofed. M2 Emtwo Monolithic Reinforced Concrete Construction System allows vertical walls with and without load bearing, horizontal floor applications and the use of roofs, balconies and stairs.

2.    monocon Content of Monolithic Reinforced Concrete Construction System

monoconThe comparison of the said construction technology and economic outlook, of which Monolithic Reinforced Concrete Construction System is representative, with traditional heavy methods can be summarized as follows:

2.1.      monocon The typology of Monolithic Reinforced Concrete Construction System panels is flexible; It is easy to adapt to the architectural needs of the project, at the same time it allows the fulfillment of curved walls, all types of surfaces and roofs.

At the same time, applied before concrete pouring; It is the representative of a very good working environment during construction, as it easily allows the laying of networks passing through the wall, such as electricity and water installations, and shaping such as doors and windows. Thus, it provides the great advantages of being stored in the form of a wall, which gains a singular structure through the application of additionally reinforced final concrete.

​

2.2.      Monocon Monolithic Reinforced Concrete Construction System is lightweight; weight range is from 4 to 10 dN/m2, (kg/m2). Unlike conventional heavy systems,monocon Monolithic Reinforced Concrete Construction System panels can be easily transported to the construction site where the static structure will be given to the concrete application.

​

With these conveniences, it includes the possibility of easy manual application without the use of any equipment by the workers in all working stages from manufacturing to construction.

2.3.      monocon With the Monolithic Reinforced Concrete Construction System  the installation of the panels and the completion of the operation are easy;  The need for structural concrete requires only some easy-to-use equipment to be applied successfully, allowing it to be easily fulfilled even in environments with very difficult environmental conditions.

2.4.      Monocon Monolithic Reinforced Concrete Construction System optimizes structural elements; The typology of the elements, the distribution of the steel wires within the panel, the content of the polystyrene and the shape of the finished panel make the structure strong and light and allow optimization according to the number of elements such as iron-concrete.

2.5.      monocon With Monolithic Reinforced Concrete Construction System panels, construction applications gain a truly singular structure; This is clearly visible when compared with traditional construction structures. In reality, the structural continuity between the horizontal and vertical elements of the surface limiting the rooms is ensured by the concrete placed in the panels at the final stage. Thus, it provides a great advantage against movements such as seismic forces. The concept of “monolithic structure” also includes the points of heat leaks depending on the continuity of the material. .

2.6.      monocon Monolithic Reinforced Concrete Construction System usually requires a continuous foundation because it distributes vertical load distribution with great cost advantages due to lower load transmission from the ground.

2.7.       Monocon Monolithic Reinforced Concrete Construction System is incredibly fast, concrete with a structural function, plastering activity and concrete poured into the panel of polystyrene are the reasons for this speed. Particularly, when the walls are constructed with double panels, polystyrene panels reinforced with concrete provide the best deformation solutions on the carrier basis, which are avoided in normal formwork applications. In single-storey house constructions built using this single panel, it gains an even more advanced status with mono-block construction of elements such as walls and roofs.

2.8.      Monocon Monolithic Reinforced Concrete Construction System is two-way; polystyrene panels can easily be of suitable size and density for the project, thus easily providing satisfactory comfort in different countries with different weather conditions. When desired (especially in cold countries), anti-humidity layer applications can be easily added compared to other solutions compared.

In conclusion,monocon The Monolithic Reinforced Concrete Construction System is the representative of the best structural solutions as well as having an economic advantage from the construction to the final application in the comfort of the residence. Indeed, it is also noteworthy that it is highly suitable for energy savings in local environments where weather conditions create heating and cooling requirements.

​

* MONOCON Monolithic Construction system panels EMTWO Produced under a   license.